This one-size-fits-all refrigerator filter / ice maker filter / dispenser filter works on any appliance that dispenses water or makes ice. If the water or ice from your fridge has an odor or an unpleasant taste, it’s likely due to chlorine or organic compounds. The H2O-RC solves that problem by eliminating contaminants with KDF media and GAC (granular activated carbon). Here are just some of the ways in which you can use this filter cartridge:
Before your water ever enters your refrigerator, it’s already filtered. The internal filter that came with your fridge…you know, the expensive one that you have to replace too often, you won’t need that anymore. The H2O-RC is good for 3,000 gallons, which equates to 1 year in most households.
Ice Maker Filter
Bad ice will spoil even the best-tasting drinks. Keep your ice and your drinks tasting great by installing the H2O-RC. It conveniently attaches to the wall or the back of the fridge. It ensures that all the water being used to make ice is already clean and pure before it’s frozen.
Water Dispenser Filter
You can connect the H2O-RC to most water dispensers. Instead of lugging around heavy water bottles to mount on top of your dispenser, buy a two-pound H2O-RC and you’re good for a year. No more lugging heavy water bottles around…not for you nor the delivery guy. And if you’re excited about how much effort you’ll save in this transition, you’ll be ecstatic about the money you’ll save.
After using the H2O-RC for a year, you will have spent a little more than $6 per month to keep great-tasting water and ice in your fridge. You and I both know that’s an awesome deal.
||3,000 gallons (11,356 liters)
||0.5 gpm (1.89 lpm)
||12.25″ length x 2.75″ diameter (31.1 x 7cm)
||4″ x 4″ x 14″ (10.2 x 10.2 x 35.6cm)
|Unit Shipping Weight
||2.2 lbs. (1kg)
Parts & Tools List
• refrigerator filter cartridge (included)
• mounting bracket with screw (included)
• crescent wrench, screwdriver, utility knife and bucket
• This is a bacteriostatic water filter designed to remove contaminants from municipally-treated water.
• This product is designed for COLD WATER ONLY (85°F / 29.4°C)
• Maximum flow rate: 0.5 gallons per minute
• Operating water pressure: 20 psi (1.4 bar) to 60 psi (4.1 bar)
1. Turn off the water supply that’s feeding water to the refrigerator.
2. Determine a convenient location for the filter cartridge.
3. Cut the water line with a utility knife at a 90° angle. The first part of the line should extend from the water supply to the inlet of the filter. Simply insert the end of that line into the white, plastic fitting that is labeled INLET. Push it in until it stops.
4. Point the outlet of the filter cartridge into the bucket and slowly turn on the water supply. Water will fill the cartridge. The water flushes out the fine carbon particles through the outlet and into the bucket. The water will be dark and then cloudy. Continue this flushing process until the water is clear.
5. The other part of the line should extend from the outlet of the filter to the refrigerator. Again, while the water is turned off, simply insert the tubing into the outlet fitting.
6. Mount the holding bracket in your desired location and snap the filter in place. Slowly turn on the water and check for leaks.